CLI Reference Guide

272 CHAPTER 7: CONFIGURING AUTHENTICATION, AUTHORIZATION, AND ACCOUNTING PARAMETERS
10 Do one of the following:
 To configure user attributes, see “Configuring User Authorization
Attributes” on page 274.
 To close the Create User Group wizard and save the changes, click
Finish.
Creating MAC
Address Users
When creating MAC address users, you configure authentication
properties. You can optionally configure user attributes, which are stored
in the local database.
To configure MAC address user authentication properties
1 Access the WX Switch wizard for the WX switch. (See “Accessing the WX
Switch Wizard” on page 187.)
2 Select AAA at the top of the wizard, if not already selected.
3 Select User from the organizer list on the left side of the page, if not
already selected.
4 Click New and select New MAC Address User. The Create MAC Address
User wizard appears.
5 In the User MAC Address box, type the MAC address for the user device,
using colons (:) as delimiters. You must specify all 6 bytes of the MAC
address.
6 In the VLAN Name box, type the name of the VLAN that the user device
belongs to (1 to 16 alphanumeric characters, with no spaces or tabs). The
WX switch will authorize the user for that VLAN. For more information on
VLANs, see “Configuring VLANs” on page 189.
7 In the MAC User Group list, select the MAC user group that the user
device belongs to, if the group is already configured.
8 Do one of the following:
 To configure user attributes, see “Configuring User Authorization
Attributes” on page 274.
 To configure a MAC address user group, see “Creating MAC Address
User Groups”.
 To close the Create MAC Address User wizard and save the changes,
click Finish.