CLI Reference Guide

240 CHAPTER 6: CONFIGURING WIRELESS PARAMETERS
Configuring
Encryption
To configure encryption, follow these steps:
1 In the Create Service Profile wizard, click Encryption. The Encryption
page appears.
2 Select the encryption types you want to use:
 WPA
 WEP
 RSN(WPA2)
 WEP+WPA
 WEP+RSN
 WEP+WPA+RSN
 WPA+RSN
 RSN
Microsoft Windows XP does not support WEP with WPA or RSN. To
configure a radio profile to provide WEP for XP clients, select WEP only.
3 Go to one of the following sections:
 “Configuring WEP”
 “Configuring WPA or RSN” on page 242
Configuring WEP
By default, dynamic WEP is enabled. You do not need to specify any WEP
keys when using dynamic WEP.
If you use dynamic WEP, 802.1X must also be configured on the client in
addition to WEP.
To use static WEP, you must provide WEP keys. You can specify the WEP
keys, as well as the WEP unicast and multicast key indexes to be used.
You can also specify whether shared key authentication is enabled.