CLI Reference Guide

234 CHAPTER 5: CONFIGURING WX SYSTEM AND ADMINISTRATIVE PARAMETERS
The local entry for the WX, static entries, and permanent entries in the
ARP table are not affected by the aging timeout.
3 To add an ARP entry, click New ARP Entry. The Create ARP Entry dialog
box is displayed.
4 In the MAC Address box, type the MAC address that the IP address is to
be mapped to.
5 In the IP Address box, type the IP address for the ARP entry.
6 Click Finish.
7 Do one of the following:
 Select another item in the WX Switch wizard, if you are using this
wizard.
 Click Finish to close the wizard and save changes.