CLI Reference Guide

Accessing the WX Switch Wizard 187
To add a switch by
uploading its basic
configuration from
the network
If you have already deployed a WX switch in the network and you want
to add the switch to the network plan, you can upload the switch’s
configuration into 3WXM, edit the switch, then redeploy the switch with
the new parameters.
1 Use the procedure in “Uploading a WX Switch Configuration into
3WXM” on page 325 to upload the switch.
2 In the Organizer panel, select the new WX switch and do one of the
following:
 Right-click on the switch, then select Edit.
 Select Config > Edit from the toolbar in the main 3WXM window.
To add a switch by
importing a
configuration file
You can add a switch to the network plan by importing a switch
configuration file.
1 Use the procedure in “Importing and Exporting WX switch Configuration
Files” on page 342 to import the switch’s configuration file.
2 In the Organizer panel, select the new WX switch and do one of the
following:
 Right-click on the switch, then select Edit.
 Select Config > Edit from the toolbar in the main 3WXM window.
Accessing the WX
Switch Wizard
To add a new switch and access the WX Switch wizard to configure it,
see “Adding a WX Switch to the Network Plan” on page 186.
To access the WX Switch wizard for a switch that is already in the
network plan, do the following:
1 In the Organizer panel, select the WX switch you want to modify.
2 Do one of the following:
 Right-click on the switch, then select Edit.
 Select Config > Edit from the toolbar in the main 3WXM window.