CLI Reference Guide

186 CHAPTER 5: CONFIGURING WX SYSTEM AND ADMINISTRATIVE PARAMETERS
Adding a WX
Switch to the
Network Plan
To create a new WX switch, do one of the following:
 In the Organizer panel, select the Mobility Domain where you want to
create the switch in the Organizer panel, then right-click and select
Insert > Wireless Switch.
 In the Organizer panel, shift+right-click to deselect an object (if one is
selected), right-click, then select Insert > Wireless Switch.
Each of these options enables you to create a new switch based on the
default settings for all switch parameters.
If the button for the Wireless or AAA page is greyed out, enter a name
for the switch in the WX Name box on the WX Properties portion of the
System and Administrative page. The Wireless and AAA pages do not
become available until the switch has a name.
To creat e a ne w WX
switch based on a
configured switch
To create a new WX switch based on a configured switch in the network
plan, use the following procedure.
1 In the Organizer panel, select the switch you want to copy, then
right-click on the switch and select Copy.
2 Right-click and select Paste. The WX Switch Wizard appears.
3 Edit the switch name in the WX Name box.
4 Edit other parameters as required. (See the rest of this chapter and the
following two chapters.)