CLI Reference Guide

156 CHAPTER 4: PLANNING THE 3COM MOBILITY SYSTEM
WX4400 switches support indirect MAP connections only.
12 To change the number of redundant connections for the distributed
connection type, type the number in the Redundant Level box.
13 For direct connections, the redundancy level is always 1.
14 To update all the constraints for the areas you will select in step 15, select
Update All Constraints. By default, 3WXM applies only changed
constraint values to the selected areas. This default behavior preserves
any constraint changes you make to individual areas when you configure
them.
15 Select the coverage areas for which you want to compute and place MAP
access points. To select a coverage area, click the box in the select
column.
16 Click Next. The Manage Constraints Progress page is active.
17 When the Completed Applying Constraints message is displayed in the
Manage Constraints Progress page, click Finish to save the changes. Go
to “To compute and place MAP access points”.
If you are using a complex concave polygon as a coverage area,
computation of MAP access points might take longer than the
computation for a simpler area.