CLI Reference Guide

Defining Wireless Coverage Areas 143
Specifying Coverage Area Properties
To specify coverage area properties:
1 In the Name box, type a name for the coverage area (1 to 60 characters
long, with no tabs).
2 Verify that the Technology selection is correct.
3 For 802.11g, to prevent the association of 802.11b clients to any radio in
this coverage area, select Exclude 802.11b clients. To allow 802.11b
clients to associate to radios in the coverage area, clear Exclude 802.11b
clients.
Even when association of 802.11b clients is disabled, if an 802.11b/g
radio detects a beacon from an 802.11b network, the radio enters
protection mode to protect against interference.
4 To calculate MAP placement and configuration based on both coverage
and capacity, enable Use Capacity Calculation. Go to step 5.
Otherwise, go to step 8.