CLI Reference Guide

Specifying the RF Characteristics of a Floor 131
3 Go to “To use the Create RF Obstacle Dialog box” on page 132.
To create RF obstacles for an area in a drawing
1 Diagonally drag the cursor over the area where you want to create RF
obstacles.
2 Right-click, and select Create RF Obstacle. The Create RF Obstacle
dialog box appears.
3 Go to “To use the Create RF Obstacle Dialog box” on page 132.
To create RF obstacles for multiple selected objects in a drawing
1 Click an object on the floor.
2 Press Shift while clicking on additional objects.
3 Right-click, and select Create RF Obstacle. The Create RF Obstacle
dialog box appears.
4 Go to “To use the Create RF Obstacle Dialog box” on page 132.
To create RF obstacles by grouping objects
You can group several objects in a drawing to specify them as one RF
obstacle. For example, if a wall consists of several lines, the lines can be
grouped. If you subsequently ungroup the objects, the RF obstacle
information is removed.
1 Select an object on the floor.
2 Press Shift while clicking additional objects.
3 Click the Group Objects icon. The grouped objects now appear as one
object group.
4 Right-click, and select Create RF Obstacle. The Create RF Obstacle
dialog box appears. See “To use the Create RF Obstacle Dialog box”.