installation and reference guide HP MPIO Full Featured DSM for MSA1000/1500 (Active-Active) Disk Arrays 3.02.00 (AA-RW8AF-TE, March 2009)

DescriptionMessageEvent
ID
A redundant path to an existing multipath disk has
failed. X represents the serial number of the disk. Y is
the SCSI address of the path that failed.
An unrecoverable path failure
occurred on SCSI address Y.
Disk X is still accessible
over redundant path(s).
304
The DSM cannot manage multipath capable disk X (SCSI
address Y) due to an internal error.
The DSM cannot manage mul-
tipath capable disk X (SCSI
address Y) due to an internal
error.
309
This event is logged when DSM detects that the path
with SCSI address Y is inconsistent and is moved to
failed state. X represents the serial number of the disk.
A reboot of the system is recommended to overcome
this inconsistent state.
The DSM detected an inconsist-
ency in the path (SCSI address
Y) to the multipath capable
disk X. This path has been
marked as failed.
310
Multipathing driver event log messages40