8x00 family of Disk Arrays 3.02.00 (AA-RW7SL-TE, March 2009)

Disk 2Policy:SQST-Subset

ALB:NP.B.T.L:3.0.2.4

P.B.T.LRTPHBA Slot#StateController Port#Path#

3.0.2.4000100027ActiveP898DXAAQQO101U-21

4.0.2.4000100026AvailableP898DXAAQQO101U-22

hpdsm paths device

Syntax: hpdsm paths device=x

The hpdsm paths device command displays information about the paths available for device x,

as shown in the following example.

NOTE:

• The P.B.T.L. column shows the device port, bus, target, and LUN.

• The RTP column shows the target port information as defined by SCSI-3 specification.

• The Controller Port# column shows the controller serial number followed by target port number.

hpdsm paths device=1

P.B.T.LRTPHBA Slot#StateController Port#Path#

2.0.2.1000200084ActiveP8398DXAAQQ013-41

2.0.5.1000200074ActiveP8398DXAAQQ013-32

2.0.6.1000100014ActiveP8398DXAAQQ010-13

3.0.0.1000100014ActiveP8398DXAAQQ010-14

3.0.1.1000200074AvailableP8398DXAAQQ013-35

3.0.2.1000200084AvailableP8398DXAAQQ013-46

4.0.0.1000100013AvailableP8398DXAAQQ010-17

4.0.1.1000200083AvailableP8398DXAAQQ013-48

hpdsm set device policy

Syntax: hpdsm set device=x policy=policy

Syntax: hpdsm set device=all policy=policy

HP MPIO Full Featured DSM for EVA4x00/6x00/8x00 family of Disk Arrays 3.02.00 33