installation and reference guide HP MPIO Full Featured DSM for EVA4x00/6x00/8x00 family of Disk Arrays 3.02.00 (AA-RW7SL-TE, March 2009)

Contents of the data
dump
DescriptionMessage
Event
ID
DSM ID of the failed at-
tempt
An MPIO call to DSM’s RemoveDevice
operation failed.
A device under pseudo-LUN , being
controlled by DSM_name was re-
moved, but the DSM failed the
operation.
38
HP MPIO EVA DSM event log messages
Table 7 lists the HP MPIO EVA DSM event log messages and provides a description of each message.
Table 7 HP MPIO EVA DSM event log messages
DescriptionMessage
Event
ID
A new multipath disk has been discovered. X repres-
ents the serial number of the new disk. Y is the SCSI
address of the first path to this disk.
Discovered a new multipath cap-
able disk with serial number X;
first path SCSI address Y.
101
A new path to an existing multipath disk has been
discovered. X represents the serial number of the
disk. Y is the SCSI address of the new path that was
found.
A new path (SCSI address Y) was
added to existing multipath
capable disk X.
102
A failed path to an existing multipath disk has re-
covered. X represents the serial number of the disk.
Y is the SCSI address of the path that has been re-
covered.
The path (SCSI address Y) to
multipath capable disk X has
recovered.
103
A previously selected path has been restored as the
preferred path for I/O operation. X represents the
serial number of the disk. Y is the SCSI address of
the preferred path that has been restored.
The preferred path (SCSI address
Y) for multipath capable disk X
has been restored.
107
The DSM has completed processing the removal
notification for a path to a given multipath disk. X
represents the serial number of the disk. Y is the
SCSI address of the path for which the removal noti-
fication has been processed.
The DSM has completed remove
processing for path (SCSI ad-
dress Y) to multipath capable
disk X.
108
The DSM has successfully completed the initialization
during startup. X is the version of the DSM.
The DSM (version X) has been
started successfully.
109
This message is logged when the DSM detects that
a previously failed (inoperative) multipath capable
disk with serial number X has recovered and become
operational again.
The previously failed multipath
capable disk X has recovered.
110
This event is logged when generation of removal
event notifications (Event IDs 304, 302 and 108)
for the multipath capable disk with serial number X
has been disabled upon request in the DSM.
The removal event notifications
for multipath capable disk X
have been disabled upon request.
111
HP MPIO Full Featured DSM for EVA4x00/6x00/8x00 family of Disk Arrays 3.02.00 45