8x00 family of Disk Arrays 3.02.00 (AA-RW7SL-TE, March 2009)

hpdsm cleanup device=all

Successful for all the devices. Verify by issuing "hpdsm devices" command.

hpdsm notify

Syntax: hpdsm notify event=notification_event_number time=number_of_minutes

The hpdsm notify command defines user notification of events. The time attribute defines the number

of minutes that elapses from the time the event occurs until the user is notified. The maximum value

that can be entered is 35000 minutes.

NOTE:

Syntax: hpdsm notify event=notification_event_number

The above command will make the notification to wait indefinitely until the user terminates the wait

(with Ctrl-C).

Table 4 defines the selections for the notification command string.

Table 4 Notification strings

Notifies the user when DSM:Notifica-

tion_event_num-

ber

Notification string

Detects a new device.1

HPDSM_NEW_DEVICE

Detects a redundant path to an existing device.2

HPDSM_ADDITIONAL_PATH

Determines that a device configuration contains the

maximum number of supported paths.

HPDSM_MAX_PATH_REACHED

Detects that the last path to the device is removed.4

HPDSM_LAST_PATH_FAILURE

Detects an existing path to a device has failed and an

alternate path is being used.

HPDSM_PATH_FAILOVER

Determines that the configuration contains the maximum

number of supported LUNs

HPDSM_MAX_LUNS_REACHED

Detects any event related to MPIO framework and DSM

occurs.

HPDSM_ALL_NOTIFICATIONS

The above notifications are sent by the HP MPIO EVA DSM and MPIO framework to the CLI. The CLI

displays the event in the command window as shown in the following example.

Example:

HP MPIO Full Featured DSM for EVA4x00/6x00/8x00 family of Disk Arrays 3.02.00 37