installation and reference guide HP MPIO Full Featured DSM for EVA3000/5000 VCS 4.xxx Disk Arrays 3.02.00 (AA-RW8SH-TE, March 2009)

P.B.T.LRTPHBA Slot#State
Controller
Port#
Path#
*
3.0.2.3000100027Active
P4889B59IM500P-
1
1
4.0.2.3000100026Available
P4889B59IM5024-
1
2
Device Name:COMPAQ HSV111_(C)COMPAQDevice#:2
Active Paths: 2Serial No:6005008B400101F600018000
Disk 2Policy:SQST-Subset
ALB:NP.B.T.L:3.0.2.4
P.B.T.LRTPHBA Slot#StateController Port#Path#
3.0.2.4000100027ActiveP4889B59IM500P-11
4.0.2.4000100026AvailableP4889B59IM5024-12
hpdsm paths device
Syntax: hpdsm paths device=x
The hpdsm paths device command displays information about the paths available for device x,
as shown in the following example.
NOTE:
• The P.B.T.L. column shows the device port, bus, target, and LUN.
• The RTP column shows the target port information as defined by SCSI-3 specification.
• The Controller Port# column shows the controller serial number followed by target port number.
hpdsm paths device=1
P.B.T.LRTP
HBA
Slot#
StateController Port#Path#
5.0.0.1000100014ActiveP4889B59IM501F-11
5.0.1.1000100024ActiveP4889B59IM501F-22
HP MPIO Full Featured DSM for EVA3000/5000 VCS 4.xxx Disk Arrays 3.02.00 33