Installation and Reference Guide for HP MPIO Full Featured DSM for XP family of Disk Arrays 3.00.00 (AA-RVJ6F-TE, March 2008)

HP MPIO XP DSM eve
nt log messages
Table 5 lists th
e HP M PIO XP DSM event log messages and provides a description of each message.
Table 5 HP MPIO XP DSM event log messages
Event ID Message
Description
101
Discovered a new multipath
capable disk with serial number
X; first path SCSI address Y.
Anewmultipath
disk has been discovered. X represents the serial
number of the new disk. Y is the SCSI address of the first path to
this disk.
102
A new path (SCSI address Y)
was added to existing multipath
capable disk X.
A new path to an existing multipath disk has been discovered. X
represents the serial number of the disk. Y is the SCSI address of the
new path that w
as found.
103
The path (SCSI address Y) to
multipath capable disk X has
recovered.
A failed path to an existing multipath disk has recovered. X represents
the serial number of the disk. Y is the SCSI address of the pa th that
has been reco
vered.
107
The preferred path (SCSI address
Y) for multipath capable disk X
has been restored.
A previously selected path has been restore d as the preferred path for
I/O operatio
n. X represents the serial number of the disk. Y is the
SCSI address of the preferred path that has been restored.
108
The DSM has completed remove
processing for path (SCSI address
Y) to multipath capable disk X.
The DSM has c
ompleted processing the removal notification for a path
to a given mu
ltipath disk. X represents the serial number of the disk.
YistheSCS
I address of the path for which the removal notification
has been processed.
109
The DSM (version X) has been
started successfully.
The DSM has
successfully completed the initialization during startup.
Xisthever
sion of the DSM.
301
The DSM failed to initialize
during startup.
The DSM did not initialize successfully during startup.
302
An unrecoverable path failure
occurred on SCSI address Y. Disk
X failed due to no redundant
paths available.
All paths to an existing multipath d isk have failed. X represents the
serial number of the disk. Y is the SCSI address of the last path that
failed.
303
Too many paths for disk with
serial number X. Path (SCSI
address Y) not added.
Anewpat
h in excess of the supported number of paths for an existing
multipa
th disk has been discovered. X represents the serial number of
the disk. Y is the SCSI address of the newly found path.
304
An unrecoverable path failure
occurred on SCSI address Y.
Disk X is still accessible over
redundant path(s).
A redundant path to an existing multipath disk has failed. X represents
the serial number of the disk. Y is the SCSI address of the pa th that
failed.
305
The DSM timed out on the I/O
throttle operation for multipath
capable disk X.
TheDSMwasunabletosuccessfullythrottleI/Oactivitywithinthe
time-out period, for the specified multipath disk. X is the serial number
of the disk.
306
Numbe
r of LUNs exceeds the
maxim
um limit supported. Disk X
with p
ath SCSI address Y will be
igno
red.
New LUN in excess of the supported number of LUNs for an existing
HBA to array port nexus has been discover ed. X represents the serial
number of the disk. Y is the SCSI address of the newly found path.
309
The DSM cannot manage multipath
capable disk X (SCSI address Y)
due to an internal error.
The DSM cannot ma nage multipath capable disk X (SCSI address Y)
due to an internal error.
HP MPIO Full Featured DSM for XP family of Disk Arrays 3.00.00
39