Manualshelf

installation and reference guide HP MPIO Full Featured DSM for EVA4x00/6x00/8x00 family of Disk Arrays 3.02.00 (AA-RW7SL-TE, March 2009)

ManualsBrandsHP ManualsSoftwareWindows MPIO DSM for EVA
51525354555657585960
Figure 2 MPIO Properties page with Discover Multi-Paths tab enabled
To enable multipath support for the listed devices, select a Device Hardware ID, and click Add.
All devices with this hardware ID are handled by a DSM (either a vendor-supplied DSM or MS DSM).
DSM Install
In the MPIO Properties page, click the DSM Install tab. This tab enables you to install a vendor-supplied
DSM. While installing a DSM, you must specify the driver path, the INF file name, and the DSM
Hardware ID. Figure 3 shows the MPIO Properties page with the DSM Install tab enabled.
HP MPIO Full Featured DSM for EVA4x00/6x00/8x00 family of Disk Arrays 3.02.00 51