HP MPIO Full Featured DSM for XP family of Disk Arrays 4.00.00 installation and reference guide (AA-RVJ6J-TE, October 2009)

Change Load Balance policy (y/n)? y
Load Balance policy changed. Verify by issuing "hpdsm devices" command.
Example:
hpdsm set device=all policy=rr
Successful for all the devices. Verify by issuing "hpdsm devices" command.
hpdsm set device subset path
Syntax: hpdsm set device=x subset=add/remove path=all
Syntax: hpdsm set device=x subset=add/remove path=y,z
Syntax: hpdsm set device=all subset=add/remove path=all
Syntax: hpdsm set device=all subset=add/remove path=y,z
The hpdsm set device=x subset=add/remove path=y,z command enables or disables
subset setting for device x and adds or removes y,z to or from the subset, as shown in the following
example:
Example:
hpdsm set device=1 subset=add path=all
Device Name:HP OPEN-V
Device Serial No.:50 142460C01
Change Subset setting (y/n)? y
Subset setting changed. Verify by using "hpdsm devices" command.
Example:
hpdsm set device=all subset=remove path=1
Successful for all the devices. Verify by using "hpdsm devices" command.
Managing storage arrays using the HP MPIO XP DSM with the CLI utility34