Setup and Install

Conﬁguring HP WebQoS

Conﬁguring WebQoS from the Management User Interface

Chapter 3 49

Redirections High

Redirections Medium

Redirections Low

Rejections High

Rejections Medium

Rejections Low

Deferred Outstanding High

Deferred Outstanding Medium

Deferred Outstanding Low

Deferral Time Average High

Deferral Time Average Medium

Deferral Time Average Low

Deferral Time Current High

Deferral Time Current Medium

Deferral Time Current Low

3. If you wish to conﬁgure a Service Level Agreement for the service, go

to the next section. Otherwise click [OK].

To Conﬁgure Service Level Objectives for the Service

A service level objective (SLO) speciﬁes the level of service that you

expect to provide. WebQoS monitors compliance and takes corrective

actions if you have speciﬁed them. SLOs put limits on the total number

of sessions that have not expired and are possibly active for all the sites

in the service. If you have conﬁgured the SLO, the results are displayed

by selecting the Service in the main Management Interface Window and

clicking on the Statistics icon in the task bar. For more information on

viewing statistics, see “Displaying Service Performance Statistics” on

page 107.

To add the SLO for the service, do the following:

1. From the Add Service Configuration window select the SLOs tab

(Figure 3-7, "Add a Service Conﬁguration SLO Dialog Box").

Or, if you are adding the SLO to an existing service, select the service

in the Services/Systems pulldown menu and choose the Edit task

icon button.