User's Manual

◦
Input key in: Select the format for the WEP key.
◦
WEP Key: The WEP key format is programmatically determined and validated by using either
alphanumeric ASCII (8-bit) characters or hexadecimal (4-bit) digits.
◦
Index: Select the WEP key index position (1, 2, 3, or 4) the print server uses for encrypted
communications from the list.
●
WEP-Enterprise: Select this option if the network uses WEP with EAP/802.1x authentication. This
type of security uses a central authentication server, such as Remote Authentication Dial-In User
Service (RADIUS), to authenticate users on the network. If you select this option, specify the
following settings to configure the authentication:
◦
Enabled protocols: Select one or more of the following server-based authentication
protocols:
LEAP: Lightweight Extensible Authentication Protocol. A proprietary protocol from Cisco
Systems that uses passwords for mutual authentication. During mutual authentication, the
client and server authenticate each other.
PEAP (configure certificate using EWS first): Protected Extensible Authentication Protocol.
A mutual authentication protocol that uses digital certificates for server authentication and
uses passwords for client authentication.
EAP-TLS (configure certificate using EWS first): EAP using Transport Level Security. A
mutual authentication protocol that uses digital certificates for server authentication and
uses passwords for client authentication. For additional security, the authentication
exchanges are encapsulated in TLS.
◦
Encryption strength: Select the minimum encryption strength to use during communications
with the authentication server. For each encryption strength, ciphers are specified to identify
the weakest cipher allowed.
3. WiFi Protected Access (WPA):
●
WPA Version: Select the WPA version.
●
Encryption: Select the encryption method.
●
WPA-Personal: Enter the security key that is used to generate the preshared key for
authentication on the network. The security key must be entered in one of the following formats:
◦
A passphrase that is 8 to 63 characters and consists of 0 through 9, a through z, A through Z,
and numerous special characters that include the following:
! @ # $ % ^ & ( ) _ + = − { } [ ] \ / “ < > ? “ ‘ ˜
◦
A security key that is 64 hexadecimal characters (0 through 9, and A through F).
●
WPA-Enterprise: Select this option if the network uses WPA with EAP/802.1x authentication. This
type of security uses a central authentication server, such as RADIUS, to authenticate users on the
network. Specify the following settings:
◦
Enabled protocols: Select one or more of the following server-based authentication
protocols:
LEA
P:
Lightweight Extensible Authentication Protocol. A proprietary protocol from Cisco
Systems that uses passwords for mutual authentication. During mutual authentication, the
client and server authenticate each other.
ENWW Device Configuration Options for Wireless 377