User Manual

Connecting the cables
NOTE: The monitor ships with select cables. Not all cables shown in this section are included with the
monitor.
1. Place the monitor in a convenient, well-ventilated location near the computer.
2. Connect a video cable.
NOTE: The monitor will automatically determine which inputs have valid video signals. The inputs can
be selected by pressing the Minus button on the rear panel or through the on-screen display by pressing
the Menu button and selecting Input Control.
●
Connect an HDMI cable to the HDMI connector on the back of the monitor and the other end to the
source device.
●
Connect a DisplayPort cable to the DisplayPort connector on the rear of the monitor and the other
end to the DisplayPort connector on the source device.
6 Chapter 1 Getting Started