User Manual
Rear components
Component Function
1 Menu button Press to open the OSD menu, select a menu item from the OSD, or close the
OSD menu.
2 Plus button
Function button 2—
assignable*
If the OSD menu is open, press to navigate forward through the OSD menu
and increase adjustment levels.
If the OSD menu is inactive, press to advance to the next active input port
(USB-C Video, HDMI, DisplayPort).
3 Minus button
Function button 3—
assignable*
If the OSD menu is open, press to navigate backward through the OSD menu
and decrease adjustment levels.
If the OSD menu is closed, press to open the Viewing Modes menu.
4 OK button
Function button 4—
assignable*
If the OSD menu is open, press to conrm selection.
If the OSD menu is closed, press to open the Information menu.
5 Power button When the monitor is o, press the button to turn on the monitor.
6 DisplayPort Connects the DisplayPort cable from the source device to the monitor.
7 HDMI2.0 port Connects the HDMI cable from the source device to the monitor.
Recommended resolution: 3840 x 2160 (60 Hz)
8 HDMI1.4 port Connects the HDMI cable from the source device to the monitor.
Recommended resolution: 2560 x 1440 (60 Hz)
9 USB Type-C port (select
products only)
Connects the USB Type-C cable from the source device to the monitor.
10 Power connector Connects an AC adapter.
* Function buttons 2–4 may be used to navigate through the OSD menu based on the indicators above the buttons
that are activated while the OSD menu is open.
NOTE: You can recongure the Function buttons by using the Assign Button function in the OSD menu to
quickly select the most commonly used operations.
Product features and components 3