User Manual

●
Connect one end of a DisplayPort cable to the DisplayPort on the rear of the monitor and the other
end to the DisplayPort on the source device.
The Auto-Switch Input function switches between the HDMI input and the DisplayPort input.
NOTE: The monitor’s USB Type-C port can also function as a DisplayPort audio/video input when
connected to a USB Type-C source device. To switch to the USB Type-C input, press one of the OSD
bezel buttons to open the OSD menu, and then select Input Control > USB-C Video.
3. Connect one end of a USB Type-C cable to the USB Type-C port on the rear of the monitor and the other
end to a USB Type-C port on the source device. Use only the HP-approved USB Type-C cable provided
with the monitor. (select products only)
Setting up the monitor 7