User's Manual

Table Of Contents
2. The printhead is designed to be inserted into any of the available slots. Once the printhead is inserted into a
specic slot, it will be set up to work only with that combination of colors. For this reason, it is important to
mark the printhead with its specic color, on the label that comes with it, matching the color of the carriage
slot into which the printhead is to be inserted.
3. Insert the new printhead into its correct slot in the carriage.
CAUTION: Insert the printhead slowly and vertically, straight down. It may be damaged if you insert it too
fast, or at an angle, or if you rotate it as you insert it.
CAUTION: When installing the new printhead there may be some resistance, so you need to press it down
rmly but smoothly. You should hear a beep and see conrmation on the front-panel display that the
printhead has been inserted. If you have diiculty, see Cannot insert a printhead on page 179.
132 Chapter 11 Handling ink cartridges and printheads ENWW