User's Manual

Table 6-2 Control-panel light patterns (continued)
Light status State of the printer Action
The loaded paper is not the size needed
for the print job.
Replace the paper, or press the Resume/Cancel
button to continue with the size currently loaded.
The printer has experienced a general
engine error.
Press the Resume/Cancel button to continue.
If the error repeats, turn o the printer. Wait 30
seconds, and then turn on the printer.
Incorrect rmware has been loaded.
Press the Resume/Cancel button to continue,
Load the correct rmware.
The Attention and Ready lights are
on.
The printer has experienced a fatal error
from which it cannot recover.
1. Turn o the printer or disconnect the power
cord from the printer.
2. Wait 30 seconds, and then turn on the printer or
reconnect the power cord to the printer.
3. Wait for the printer to initialize.
If the error persists, contact HP customer support.
The Attention and Ready lights are
blinking.
The printer is initializing, cleaning, or
cooling down.
ENWW Interpret control-panel light patterns 49