User's Manual
Interpret control-panel light patterns
Table 6-1 Status-light legend
Symbol for "light o"
Symbol for "light on"
Symbol for "light blinking"
Table 6-2 Control-panel light patterns
Light status State of the printer Action
The Attention light is blinking. The printer is in manual-feed mode. Load the correct paper type and size into the input
tray. Press the Resume/Cancel button to
continue.
The printer is processing a manual duplex
job.
Load the pages into the input tray to print the second
sides. Press the Resume/Cancel button to
continue.
The input tray is empty.
Load the tray and press the Resume/Cancel
button to continue.
NOTE: Wireless models have a paper sensor and
will continue automatically after paper is loaded.
A door is open. Verify that the toner-cartridge door is fully closed.
The printer has failed to pick up a sheet of
paper to process a print job.
Verify that paper is correctly loaded, and then press
the Resume/Cancel button to continue.
Paper is jammed in the printer. Check for jams in the input tray, the output bin, and
the toner cartridge area. Clear the jam. Press the
Resume/Cancel button to continue.
The toner cartridge is missing or
incorrectly installed.
Verify that all supplies are in place and installed
correctly.
The toner cartridge is very low. Replace the toner cartridge.
NOTE: There will be no attention state if the printer
is congured to continue printing when the toner
cartridge is very low.
The toner cartridge is incompatible with
the printer, possibly due to a missing or
damaged memory chip.
Replace the toner cartridge.
The toner cartridge has been protected on
another printer.
Replace the toner cartridge.
The printer has detected an unauthorized
toner cartridge.
Replace the toner cartridge.
48 Chapter 6 Solve problems ENWW