User's Manual

Table 6-4 Image defects table quick reference (continued)
Sample Description Possible solutions
Table 6-6 Black page on page 115 Table 6-5 Banding defects on page 115 Table 6-13 Streak defects on page 120
Table 6-8 Fixing/fuser defects on page 116 Table 6-10 Image placement defects
on page 117
Table 6-12 Output defects on page 119
Image defects, no matter the cause, can often be resolved using the same steps. Use the following steps as a
starting point for solving image defect issues.
1. Reprint the document. Print quality defects can be intermittent in nature or can go away completely with
continued printing.
2. Check the condition of the cartridge or cartridges. If a cartridge is in a Very Low state (it has passed the
rated life), replace the cartridge.
3. Make sure that the driver and tray print mode settings match the media that is loaded in the tray. Try using
a dierent ream of media or a dierent tray. Try using a dierent print mode.
4. Make sure that the printer is within the supported operating temperature/humidity range.
5. Make sure that the paper type, size, and weight are supported by the printer. See support.hp.com for a list
of the supported paper sizes and types for the printer.
114 Chapter 6 Solve problems ENWW