P00122_-_HP_SAS_HBA_Profile

20 Version 1.1.0
7.1.2 HPSAS_DiskDrive.DriveConfiguration
Indicates the how the drive has been configured by the controller. Supported values are:
Table 4 - HP SAS HBA profile: HPSAS_DiskDrive.DriveConfiguration
Value ValueMap
0 Unknown
1 Unconfigured
2 Data
3
Spare
4 Non RAID
7.1.3 HPSAS_DiskDrive.DriveRotationalSpeed
Value indicates the rotational speed of the drive in Revolutions per minute.
7.1.4 HPSAS_DiskDrive.DriveHasMNPData
Boolean value indicates that the drive supports reporting of Monitoring and Performance data counters.
Note that this value will always be false for SAS HBA provider.
7.1.5 HPSAS_DiskDrive.DrivePlacement
Value indicates where the drive is located with respect to the controller.
Table 5 - HP SAS HBA profile: HPSAS_DrivePlacement
Value ValueMap
0 Unknown
1
Internal
2 External
7.2 HPSAS_StorageVolume
The HPSAS_StorageVolume class has been extended from CIM_StorageVolume class as defined in
SNIA Block Services profile.
7.2.1 HPSAS_StorageVolume.PercentComplete
During a rebuild operation, this will indicate progress as a percentage value. Note this value shall only be
populated when a rebuild operation is being performed on this logical volume.
7.2.2 HPSAS_StorageVolume.FaultTolerance
Enumeration to indicate which type of raid is currently configured for a logical volume. Supported values
are:
Table 6 - HP SAS HBA profile: HPSAS_StorageVolume.FaultTolerance
Value ValueMap
0 Unknown
1
RAID 0
2 RAID 1
3 RAID 1+0