HP WBEM TC Document Number: P00104 Date: 04/21/09 Version: 1.2.0 HP Sensors Profile © Copyright 2008 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty.
Contents 1 2 2.1 2.2 2.3 3 4 5 6 7 7.1 7.2 7.3 7.4 7.5 7.6 7.7 8 9 9.1 9.2 9.3 10 10.1 10.2 10.3 10.4 10.5 10.6 10.7 11 Scope ............................................................................................................................................. 6 Normative References ................................................................................................................... 6 Approved References .................................................................................
Table 6 – Class: HP_MemberOfSensorCollection .............................................................................................. 15 Table 7 – Class: HP_HostedSensorCollection ................................................................................................... 15 Table 8 – Class: HP_SystemSensor................................................................................................................... 15 Table 9 – Class: HP_AssociatedSensor ...................................
Foreword The HP Sensors Profile P00104 was prepared by the HP WBEM TC. 4 Version 1.2.
Introduction The information in this specification should be sufficient for a provider or consumer of this data to identify unambiguously the classes, properties, methods, and values that shall be instantiated and manipulated to represent logical Sensors in HP systems. The target audience for this specification is implementers who are writing CIM based providers or consumers of management interfaces representing the component described in this document. Version 1.2.
1 Scope The HP Sensor profile extends the management capability of referencing profiles by adding the capability to represent the logical Sensors and sensor consolidated status in HP specific ways. 2 Normative References The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. 2.
mandatory used to indicate requirements strictly to be followed in order to conform to the document and from which no deviation is permitted may used to indicate a course of action permissible within the limits of the document need not used to indicate a course of action permissible within the limits of the document optional used to indicate a course of action permissible within the limits of the document referencing profile Indicates a profile which owns the definition of this class and can include a refer
Scoping Class: Same as DSP1017 – Sensor Profile Extends: DMTF DSP1017, Sensors Profile 1.0.0 Specializes: HP WBEM TC P00107, HP Consolidated Status Profile The HP Sensor profile extends DMTF DSP1017 and specializes HP WBEM TC P00107 to add sensor and sensor consolidated status characteristics that are specific to HP systems. Table 1 – Related Profiles Profile Name Organization Version Relationship DSP1017 – Sensors Profile DMTF 1.0.0 Mandatory P00100 – HP Profile Registration Profile HP WBEM TC 1.
CIM_ComputerSystem see referencing profile 1 1 HP_GroupSystemSpecificCollection see HP Consolidated Status profile CIM_NumericSensor see DMTF Sensors Profile HP_SystemSensor HP_HostedSensorCollection 0..* HP_SensorCollection HP_RegisteredProfile see HP profile registration profile 0..1 HP_MemberOfSensorCollection 1 CIM_ManagedSystemElement 1..* See referencing profile * HP_ElementConformsToProfile (see HP Profile Registration profile) 1..* HP_NumericSensor NumericSensorType HP_AssociatedSensor 1.
CIM_MemberOfCollection see HP Consolidated Status profile CIM_SystemDevice see DMTF Sensors Profile HP_MemberOfSensorCollection HP_SystemSensor HP_GroupHostedCollection see HP Consolidated Status profile HP_HostedSensorCollection Figure 2 – HP Sensors Profile: Inheritance Hierarchy Diagram 7 Implementation Requirements This section details the requirements related to the arrangement of instances and properties of instances for implementations of this profile. 7.
7.2 HP_SensorCollection Sensor collection modeling is optional. There may be one or more instance of HP_SensorCollection instantiated. Instances of HP_NumericSensor are associated to HP_SensorCollection through the HP_MemberOfSensorCollection association. Instances of HP_SensorCollection are associated to its containing instance of CIM_ComputerSystem through the HP_HostedSensorCollection association. 7.3 HP_SensorCollection.GroupOperationalStatus HP_SensorCollection.
profile1:CIM_RegisteredProfile CIM_ElementConformsToProfile RegisteredName: Base System Profile system1:CIM_ComputerSystem HP_HostedSensorCollection CIM_ReferencedProfile profile1:CIM_RegisteredProfile RegisteredName: Sensors Profile sensorcollection1:HP_Sens orCollection HP_SystemSensor GroupOperationalStatus: (OK) HP_ExtendsProfile tempsensor2:HP_Nu mericSensor profile1:HP_RegisteredProfile OperationalStatus: (OK) RegisteredName: HP Sensors Profile HP_MemberOfSensorCollection tempsensor1:HP_Nu m
system1:CIM_ComputerSystem HP_SystemFan fan1:HP_Fan OperationalStatus: (OK) HP_AssociatedSensor HP_SystemSensor sensor1:HP_NumericSensor SensorType: (Tachometer) Figure 4 – HP Fan Profile: Associated Sensor Object Diagram Version 1.2.
9.2 Retrieve the Sensor Group Operational Status For the given instance of HP_NumericSensor, select the associated instance of HP_SensorCollection through HP_MemberOfSensorCollection association. Retrieve the value of HP_SensorCollection.GroupOperationalStatus property. 9.3 Determine the Type of Sensor Collection For the given instance of HP_SensorCollection, select an associated instance of HP_NumericSensor through HP_MemberOfSensorCollection association.
Properties Requirement OtherRegisteredOrganization 10.3 Mandatory Description “HP WBEM TC” HP_SensorCollection HP_SensorCollection is used to represent a sensor collection in a managed system. Table 5 – Class: HP_SensorCollection Properties Requirement Notes InstanceID Mandatory Key GroupOperationalStatus Mandatory See Section 7.2 ElementName Mandatory Description Mandatory 10.
10.7 HP_AssociatedSensor HP_AssociatedSensor is used to represent an association between HP_NumericSensor and CIM_ManagedSystemElement.
ANNEX A (normative) Change Log Version Date Description 0.1 5/9/06 Initial Draft 0.2 5/30/06 Updates to properties 1.0 5/31/06 Updated properties 1.0 11/29/06 1.1.0 7/17/08 Version 1.2.
ANNEX B (informative) Acknowledgments 18 Version 1.2.
ANNEX C (informative) Included WBEM TC CR Numbers CR Number Date CR00106 5/31/06 Version 1.2.
Bibliography This section contains a list of the external references and dependencies for this specification. 20 Version 1.2.
