HP VMware Utilities User Guide VMware vSphere 5.5 and 5.
© Copyright 2007, 2014 Hewlett-Packard Development Company, L.P. Confidential computer software. Valid license from HP required for possession, use or copying. Consistent with FAR 12.211 and 12.212, Commercial Computer Software, Computer Software Documentation, and Technical Data for Commercial Items are licensed to the U.S. Government under vendor's standard commercial license. The information contained herein is subject to change without notice.
Contents 1 Introduction...............................................................................................4 Installing offline bundles on an vSphere 5.5 and updates host using vSphere CLI 5.0 esxcli utility........4 Prerequisites........................................................................................................................4 Installing offline bundles on an vSphere 5.5 and updates host using VMware vCenter Update Manager....................................................
1 Introduction This section provides information about the utilities supported on VMware vSphere 5.5 and updates. The following utilities are supported on VMware vSphere 5.5 and updates host: • HPONCFG — Command line utility used for obtaining and setting ProLiant iLO configurations. • HPBOOTCFG — Command line utility used for configuring ProLiant server boot order. • HPSSACLI – Command line utility used for configuration and diagnostics of ProLiant server SmartArrays.
HPONCFG utility The HPONFCG utility only supports HP ProLiant 300/500/700/900 Server series, 100 Series Gen8 servers, and HP ProLiant BL Servers that are listed in the vSphere Server Support Matrix. To visit the vSphere Server Matrix page, go to www.hp.com/go/vmware and select Certified ProLiants under Tools/Resource section. HP offers support for the iLO 2, iLO 3 and iLO 4 features available on ProLiant servers with the HPONCFG utility.
Table 1 hponcfg Command Line Arguments (continued) Argument Function -r, - -reset This argument resets the iLO 2, iLO 3 or iLO 4 to factory defaults. -h, - -help, - -? These arguments display simple help messages. HPONCFG return codes This section provides description about the return code after running the command. Table 2 hponcfg return codes Value Meaning -1 ERROR: A general system error detected while running HPONCFG 0 Script succeeded.
PAGE 8The requested information is returned in the log file, which, in this example, is named log.txt.
Server Serial Number: x.x.x.x x.x.x.x – As per customer’s environment. To set the minimum firmware level, run the following command: /opt/hp/tools # ./hponcfg —m 2 The following output is displayed: Firmware Revision = 2.05 Device type = iLO 2 Driver name = hpilo HPBOOTCFG utility The hpbootcfg utility only supports HP ProLiant 300/500/700/900 Server series, 100 Series Gen8 servers, and HP ProLiant BL Servers that are listed in the vSphere Server Support Matrix.
The following output is displayed: Usage: esxcli hpbootcfg {cmd} [cmd options] Available Commands: execute execute — hpbootcfg command with options parameter help — show hpbootcfg help show — show current hpbootcfg settings To view the current boot settings, run the following command: # esxcli hpbootcfg show This System only support BIOS/Legacy boot.
Additional references to HP Smart Storage Administrator guides and white papers are available at: http://h20000.www2.hp.com/bizsupport/TechSupport/DocumentIndex.jsp?lang=en&cc=us& contentType=SupportManual&prodTypeId=18964&prodSeriesId=468780&docIndexId=64179. HPSSACLI command-line syntax Using VMware esxcli requires knowledge about the CLI usage. The VMware vSphere command line documentation is available at: http://www.vmware.com/support/developer/vcli/.
Example 2 This example shows the detailed configuration information for the SmartArray controller in slot 0. # esxcli –server=”servername or IP” –user=”username” –password”root password” hpssacli cmd -q “controller slot=0 show config detail” The following output is displayed: Smart Array P410i in Slot 0 (Embedded) Bus Interface: PCI Slot: 0 Serial Number: 5001438013A25C90 Cache Serial Number: PBCDF0CRH0J7SD RAID 6 (ADG) Status: Disabled Controller Status: OK Hardware Revision: C Firmware Version: 3.
physicaldrive 1I:1:2 (port 1I:box 1:bay 2, SAS, 146 GB, OK) physicaldrive 1I:1:1 Port: 1I Box: 1 Bay: 1 Status: OK Drive Type: Data Drive Interface Type: SAS Size: 146 GB Rotational Speed: 10000 Firmware Revision: HPDE Serial Number: 6SD3FJVL0000B145MFXB Model: HP EG0146FAWHU Current Temperature (C): 36 Maximum Temperature (C): 46 PHY Count: 2 PHY Transfer Rate: 6.
HPTESTEVENT utility The hptestevent utility allows an application to request, so that the HP Insight Management WBEM Providers generate the Informational Test Indication with ProviderName “HP Test” and EventID 1, and the CPQ SNMP test trap with OID 1.3.6.1.4.1.232.11.2.8.1.0.11003. The HP Insight Management WBEM Providers must be installed, enabled and running on the system where this utility is executed. The WBEM Providers must be configured to send indications to the listener.
HPTESTEVENT command-line examples This section provides sample examples to run the utility. Table 9 hptestevent command-line examples Command-line Description /opt/hp/tools/hptestevent Run command directly on the ESXi host esxcli hptestevent execute Use esxcli to run the command Generating an ADU report (diagnostics) from within HPSSACLI for vSphere 5.5 and updates The HPSSACLI application contains the ability to generate a diagnostic report of the system and its Smart Array storage configuration.
2 Support and other resources This chapter provides information about the contact details and reference documents. Contacting HP This section provides information about the prerequisites to be verified before contacting HP and mechanism supported by the organization for sharing the feedback.
New and changed information in this edition • Wording added for hponcfg and hpbootcfg to identify both tools support execution on ProLiant Series 100 Gen 8. • Additional arguments for hponcfg command line. Related information Following documents and websites provide related information: Documents Following documents are supported for the product: • HP VMware vSphere 5.1 Release Notes • HP VMware vSphere 5.
WARNING A warning calls attention to important information that if not understood or followed will result in personal injury or nonrecoverable system problems. CAUTION A caution calls attention to important information that if not understood or followed will result in data loss, data corruption, or damage to hardware or software.
Index D document related documentation, 17 R related documentation, 17 19
