HP integrated VMware ESXi 5.0 U1 June 2012 Datasheets

HP Insight Manager WBEM Ethernet 21
Property Name
Property Implementation
SystemName SMX_ComputerSystem.Name
CIM_RemoteServiceAccessPoint
AccessContext
0 (Unknown)
2 (Default Gateway)
AccessInfo
If ProtocolIFType = 4095 (IPv4), then text value will be dot-
delimited IP address of default gateway followed by the IPv4
netmask; otherwise, 0.0.0.0 if the default gateway is unassigned.
If ProtocolIFType = 4097 or 4098 (IPv6), the text value will be
either a valid IPv6 Address or ::/128if default gateway is
unassigned.
InfoFormat
3 (IPv4 Address)
4 (Ipv6 Address)
1-2-16 SMX_EthernetRemoteAccessAvailableToIPEndpoint Class
The class implements the HP_RemoteAccessAvailableToIPEndpoint class and associates the Default
Gateway represented by
the SMX_EthernetRemoteServiceAccessPoint instance to the IP Protocol
Endpoint that has access to it.
NOTE:
Currently not implemented on on VMware ESXi platform.
The following table lists the properties implemented.
Property Name
Property Implementation
CIM_Dependency
CIM_RemoteAccessAvailableToElement
IsDefault
Boolean true if only 1 default and only 1 gateway is present. In
some systems, there may be order of access constraints if multiple
gateways are present.
Refer to the
OrderOfAccess property for gateway priorities
OrderOfAccess
0 (default - indicates ordering doesn’t apply; otherwise the numbers
indicate priority order of access.)
HP_RemoteAccessAvailableToIPEndpoint
Antecedent
Reference to
SMX_EthernetRemoteServiceAccessPoint