HP integrated VMware ESXi 5.0 U1 June 2012 Datasheets

HP Insight Management WBEM System Memory Provider 7
Property Name
Property Implementation
CIM_PhysicalComponent
RemovalConditions
3 (Removable when off)
CIM_Chip
CIM_PhysicalMemory
DataWidth
Data width of memory module in bits
Capacity
Total capacity of memory module in bytes
InterleavePosition
Position of memory module in an interleave. This property is conditional; it will
be populated if the data is available
IsSpeedInMhz
The IsSpeedInMHz property is used to indicate if the Speed property or the
MaxMemorySpeed contains the value of the memory speed. A value of TRUE
shall indicate that the speed is represented by the MaxMemorySpeed
property.A value of FALSE shall indicate that the speed is represented by the
Speed property
TotalWidth
Total width of memory module in bits
Speed
Speed of memory module in nanoseconds. Speed is set to 0 if the property is
IsSpeedInMhz=TRUE.
MaxMemorySpeed
The maximum speed in MHz of PhysicalMemory
MemoryType
Enumerator indicating the type of memory module.
Refer to MOF file for details.
PositionInRow
Position of memory module in a row. This property is conditional; it is
populated if the data is available
FormFactor
Enumerator indicating the form factor of the memory module.
Refer to MOF file for details.
For example:
8 (DIMM)
BankLabel
String identifying the physically labeled bank where the memory is located.
For examples:
'DIMM 0A' or 'PROC 1 DIMM 0A' or 'Board 1,0A' or '
Board 1,
DIMM 1A
(Upper Tray, Riser 1)'
This property is conditional; it is populated if the data is available.
SMX_MemoryModule