HP integrated VMware ESXi 5.0 U1 June 2012 Datasheets

HP Insight Management WBEM Management Processor Lite Provider 16
Property Name
Property Implementation
ElementName
Name of the Management Controller, including the product name and the
enabled state of the MP.
For example:
Product name of the management processor controller in format: <product
name> (X)
Where: <product name> is the name of the MP product. (X)indicates
whether the MP is Active or Inactive/Disabled
For example:
Integrated Lights Out 2 (iLO 2) (Inactive)
Integrated Lights Out 2 (iLO 2) (Inactive)
Integrated Lights Out 3 (iLO 3) (Active)
Integrated Lights Out 4 (iLO 4) (Active)
Remote Insight Board Lights Out Edition II (RILOE-II)
Light Out 100 (LO100) (Active)
CIM_ManagedSystemElement
OperationalStatus
Enumerators indicating the Management Processor operational status (refer
to OperationalStatus mapping table in HP Management Processor Lite
Profile for specific descriptions of when each value is populated).
OperationalStatus[0] contains MP operational status:
0 (Unknown), when NICCondition=0
2 (OK), normal operation
3 (Degraded), when NICCondition=5
6 (Error), when NICCondition=6 or MP software interface fails
OperationalStatus[1] contains NIC status (when MP is enabled):
0 (Unknown), when NICCondition=0 or MP software interface fails
2 (OK), normal operation
3 (Degraded), when NICCondition=5
6 (Error), when NICCondition=6
10 (Stopped), when NICCondition=3
15 (Dormant), when NICCondition=4
Note:
When a Management Processor is disabled (refer to
property EnabledState) OperationalStatus[0] will always report a
status of 2
(OK) so as not to contribute negatively to overall system status. An
MP is disabled only if the user has manually disabled it via the MP’s RBSU
settings; this is seen as a normal condition. In this
scenario OperationalStaus[1] is not populated.