HP integrated VMware ESXi 4.1 U2 June 2012 Datasheets

System
Temperature Sensor
Table 11-2 Class: SMX_NumericSensor
Property name
Property implementation
ElementName Temperature Sensor <sensorID>” where <sensorID> is
the
name displayed by the MP or iLO.
For example: Temperature Sensor Temp 1
CIM_ManagedSystemElement
OperationalStatus[0] 2 (OK)—if temperature reported by the sensor is within
normal operating range;
2 (OK)—if temperature reported by the sensor has
exceeded its non-critical threshold and has set fans to
full speed;
6 (Error)—if temperature reported by the sensor has
exceeded its threshold and the system is gracefully
shutting down if that action is enabled
StatusDescriptions[0] Temperature reported by the sensor is within normal
operating range—if tem
perature reported by the sensor
is within normal operating range;
Temperature reported by the sensor has exceeded its
non-critical threshold and the fans have been set to full
speed—if temperature reported by the sensor has
exceeded its threshold and has set fans to full speed;
Temperature reported by the sensor has exceeded its
threshold and the system is gracefully shutting down—
if
that action is enabled-if OperationalStatus is 6 (Error)
HealthState 5 (OK)—if OperationalStatus[0] value is 2 (OK);
20 (Major Failure)—if OperationalStatus[0] value is 6
(Error)
Name Temperature Sensor <sensorID>” where <sensorID> is
the
name displayed by the MP or iLO.
For example: Temperature Sensor Temp 1.
CIM_LogicalDevice
CreationClassName
SMX_NumericSensor
DeviceID
Unique identifier for this temperature sensor instance.
SystemCreationClassName
HP_ComputerSystem.CreationClassName
SystemName
HP_ComputerSystem.Name
CIM_EnabledLogicalElement
EnabledDefault
2 (Enabled)
EnabledState
5 (Not Applicable)
RequestedState
12 (Not Applicable)
CIM_Sensor
SensorType
2 (Temperature)