HP Insight Management WBEM Providers for HP integrated VMware vSphere 5.1 October 2012 Profiles

18 Version 1.0.1
Figure 4 shows an example of an external SCSI/SAS attached storage subsystem that contains one or
more array controllers plus an internal storage enclosure in the same chassis. This should be modeled
with the SNIA array profile as opposed to HHRC which deals with HBA raid controllers.
HPSA
_StorageEnclosureProcessor
:SE1
HPSA_StorageEnclosure:
SE
1
Location
=
”1
" (
Internal)
Container
HPSA
_DriveCage:SE
1:DC
0
HPSA_ArraySystem:abcd
OperationalStatus[]=
”
2"
SystemComponent
SystemPackaging
HPSA
_
StorageEnclosureLocation
:
SE1
ElemInfoTagDesc
= Box
ElemtInfoTag = “
1
”
PhysicalElementLocation
HPSA
_DriveCageLocation:SE1
:DC
0
ElemInfoTagDesc
= Port
ElemtInfoTag = “1I”
PhysicalElementLocation
HPSA_DiskPhysicalPackage:abcd:
D0
Container
HPSA_DiskDriveLocation:abcd
:D
0
ElemInfoTagDesc
= Bay
ElemtInfoTag
= “2
”
PhysicalElementLocation
HPSA_DiskDrive:abcd:
D0
OperationalStatus[]=”2" (OK)
Realizes
Disk Drive Lite Subprofile
HPSA_PhysicalPackage
:
abcd
SystemPackaging
HPSA
_ArraySystemLocation:
abcd
ElemInfoTagDesc
= PCISlot
ElemtInfoTag = “0
”
PhysicalElementLocation
HHRC
Internal Storage Enclosure
HP_
Chassis:
CS
1
No Location info
Container
Base Server
HP_
ComputerSystem
:CS1
SystemComponent
HP_ComputerSystemPackage
HPSA_
PortController:abcd
LogicalIdentity
Figure 5 – HP Storage Enclosure Profile: Host System with HBA (HHRC) and internal enclosure
Figure 5 shows a typical server with Embedded Smart Array controller attached to an internal enclosure.
In this case the enclosure central class (HPSA_StorageEnclosure) is discovered as previously,
associated to HPSA_ArraySystem via CIM_SystemComponent. The physical package is associated to
HPSA_StorageEnclosureProcessor via CIM_SystemPackaging. This instance shows the location as
“Internal” with respect to the host. This instance is also associated to the HP_Chassis instance (Base
Server) via CIM_Container.
In this implementation the enclosure will not monitor the Fans, Power Supplies and temperature since this
is done in the Base Server profile. In this case the OperationalStatus for the
HPSA_StorageEnclosureProcessor should contain values to indicate, “Fan not detected” etc.