Specifications

48 Chapter2

Parts Replacement Procedures

Hard Disk Drive

4. Insert the T-15 Torx Hard Disk Mounting Screws through the rubber mounting grommets and

into the screw holes located on the hard disk drive. See Figure 2-40.

Figure 2-40 Attaching the Hard Disk Drive

5. Slide the assembly into its hard drive slot, and push inward ﬁrmly until the front of the

hard disk drive bracket is ﬂush with the disk drive connector on the system board. See

Figure 2-41. The bracket hooks will lock into the chassis rail.

Figure 2-41. Positioning the Hard Disk Drive Assembly

Hard Disk

Drive Bracket

Mounting

Grommets

(do not remove)

Hard Disk

Drive

T-15 Torx Shoulder Screw

Bracket Hooks

(quantity 4)