Specifications

Chapter 2 35
Parts Replacement Procedures
CD Drive
7. Plug the audio, ATAPI and power cables into their appropriate connectors. Note that the
connectors are keyed for proper insertion. To help with plugging in the audio connector, you can
pull its cable through the back of the CD drive chassis to the front of the CD drive chassis and
connect it. Note that you should connect the audio cable first.
NOTE The red striped side of the data cable should be positioned next to the power
cable.
Figure 2-23. Plugging in the Audio, ATAPI and Power Cables
8. Tighten the two CD drive bracket screws as shown in Figure 2-24.
Figure 2-24 Tightening the Bracket Screws
Power Cable
ATAPI Cable
Audio
Cable
Ferrite Bead
Bracket
Screw
(hidden)
Bracket Screw