Specifications

Chapter 2 25

Parts Replacement Procedures

PCI I/O Card(s)

This section describes how to remove and install I/O cards.

Your B2000 workstation’s system board has four Peripheral Connect Interface (PCI) slots

for option boards. Slots 1 and 2 are full-size PCI slots. Slots 3 and 4 are half-size PCI slots.

Figure 2-10. PCI Card Slot Numbering and Capabilities

The information described in Figure 2-10. is located inside your workstation on the chassis

ﬂoor. See Figure 2-11. for the physical location of the B2000 workstation label.

Figure 2-11. Location of B2000 System Label

64 bits, 33MHz, 5V

32 bits, 33MHz, 5V

Slot 1

Slot 2

Slot 4

Slot 3

B2000 System Label