Technical data

54 Chapter 2
Installing HP-UX
Loading the Core Operating System
Loading the Core Operating System
Figure 2-21
When you have finished with configuration or elected to use the default
values by choosing OK at the System Configuration screen, you will see
this screen.
Note: you will not be asked for the SD-UX server Internet Protocol
address, unless you have booted from the network.
If you booted from media but you want to load the OS from the network,
you can make this choice later when the install program prompts you to
change media. Otherwise, if you booted from CD-ROM and you want to
load the OS from the network, you will need to interact with SD in order
to change sources.
To install the required bundles/products from the product media, the cold
install process invokes the SD-UX swinstall command. You can choose
to work with this utility interactively or non-interactively. Interacting
with the swinstall utility gives you additional flexibility in choosing a
specific set of products/filesets.
• If you choose No as in the example (to load the standard
bundles/products without interaction), swinstall will proceed with
the install, loading the appropriate bundle, based on your software