Technical data

52 Chapter 2
Installing HP-UX
Viewing or Modifying Configuration
Figure 2-20 Configure File Systems
On this screen, you can configure file system space and usage, and you
can also change Logical Volume parameters or other file system
parameters in subsequent screens, as needed. As with disk usage, the
default parameters are usually suitable and should not be changed unless
your file system requirements are unusual.
Example: You can change file system configuration by doing the following:
1. Move the cursor to highlight the mount directory item, such as
"/home", in the top box. Use the arrow key to move the cursor within
lists, and use the Tab key to move between lists and major items.
For example:
a. Use Tab to move the cursor to the "Size" field, or another item in
the lower half of the screen.
b. Leave the default size or change it to another appropriate value.
To edit, you can backspace over the old entry and type in a new
one. For the fields followed by ">", highlight the field and press the
space bar to get a mini-menu of selections. Highlight one of these
and choose it by pressing Enter.
c. When you have finished, choose Modify (for changing volume size)
or choose Add or Remove for other changes.