Technical data

Chapter 2 49
Installing HP-UX
Viewing or Modifying Configuration
Specifying Disk Usage If you selected Modify Disk Parameters, in the screen shown in Figure
2-16, you will see a screen similar to the following:
Figure 2-17
Using this screen, you can modify disk usage or parameters. The most
typical use of this screen would be to configure a second disk.
For example, you could modify the disk configuration first, and then go
on to modify the file system, as in the following sample procedures. Tab
to OK and press Enter if values are satisfactory.
Example: 1. On the Specify Disk Usage screen, select a disk with the arrow keys
and tab to the fill-in fields to change any of the usage items. Note that
the "blank" fields allow direct entry of information; the bracketed
fields have underlying mini-menus which you can display by selecting
the item and pressing the space bar. In a mini-menu, highlight an
item by using the arrow keys and choose it by pressing Enter. When
you have finished, use arrow keys to highlight Modify (if you have
made modifications) and press Enter.
2. To modify disk or volume group parameters (LVM), or simply use the
defaults, choose from the following actions: