Technical data

48 Chapter 2

Installing HP-UX

Viewing or Modifying Conﬁguration

Conﬁguring the Disk and File System

Figure 2-16

A screen display similar to this summarizes your conﬁguration and

allows you to make modiﬁcations by selecting Modify Disk Parameters or

Modify FS Parameters. You can also accept the default values by tabbing

to OK and pressing Enter. If you do this, go to Figure , “Loading the Core

Operating System,” in this chapter.

• If you select Modify Disk Parameters or Modify FS Parameters, you

will see a screen for additional parameters. (The disk in the example

is in the root volume group("vg00").

• Choosing Cancel will return you to the previous screen.

NOTE If you choose OK, you may see a warning screen indicating that one or

more of your target disks already has a ﬁle system on it.

In the warning screen, choose Continue to proceed, if you are not

concerned about any data that may exist on the target disk. OR

If you want to change target disks, choose Modify Conﬁguration and

Cancel to successively "back out" to the Root Disk Selection Screen.