Technical data

30 Chapter 2
Installing HP-UX
Booting from Media (All Series)
3. Type the following:
boot scsi.x
Use the SCSI address of the boot device for x.
4. If you see the following prompt, respond with "n".
Interact with IPL (y or n)?
Older Workstation
Boot Menu:
Older Series 700 systems display a menu similar to the following:
Figure 2-2
b) Boot from specified device
s) Search for bootable devices
a) Enter Boot Administration mode
x) Exit and continue boot sequence
?) Help
Select from menu:
When the actions menu shown above appears, do the following:
• Press s Enter, to start a search for bootable devices.
Older Workstation
Search Results
Figure 2-3
================================================================
Searching for Devices with Bootable Media.
To terminate search, press and hold the ESCAPE key.
Device Selection Device Path Device Type and Utilities
P0 scsi.6.0 HP 2213A
IPL
P1 scsi.3.0 HP HP35480A
IPL
P2 scsi.0.0 TOSHIBA CD-ROM XM-3301TA
IPL
Enter boot selection, (h)elp, or e(x)it:
================================================================
You will see a list of "Pn" selections, as above.
If the desired device does not appear in the search list, do the following: