Technical data

16 Chapter 1

Before You Install

Planning Your New Installation

Servers Server systems supported on this release include the following: T600,

K370, K570, K380, and K580. See your HP representative for updated

support information.

Hardware-Speciﬁc OS Enhancements

The J2240 Software This J2240 Software and other enablement software on your Install and

Core disc contain special versions of the HP-UX Install and Core OS

for use with the new J2240 PA-RISC workstation and other systems

The J2240 software includes two Additional Core Enhancement (ACE)

bundles for HP-UX. The July 1997 Workstation ACE bundle adds

support to HP-UX for the PA-RISC 8200 processor, Ultra SCSI I/O, 100

BaseT networking, VISUALIZE-FX graphics, and the OpenGL 3-D

programming API. The current (April 1998) ACE adds multiprocessor

(MP) conﬁguration support for the J2240.

The Install and Core OS CD-ROM contains all software necessary to boot

and run a J2240 workstation:

CAUTION Do not remove either of the Workstation ACE bundles from a J2240

computer. This software is necessary to boot and run the J2240.

Before You Install a

J2240

For information on upgrading your J282 system, see the instructions in

Model J2240 Upgrade (P/N A2876-90012).

For detailed installation information, use this manual.

For information on known problems, refer to the “Known Problems”

section of the current Release Notes (online on your new system, in

/usr/share/doc/ or available on the HP Software Depot web site: