Programming instructions

Chapter 3 61
Troubleshooting
Selftest Failures
TST 4
n
60 SYS BD CPU n dcache miss
CPU n is starting its data cache miss
self-test.
FLT 5
n
00 SYS BD unknown bus err
CPU n detected an unknown error on the
system bus (Runway).
FLT 5
n
02 SYS BD path err assertd
CPU n detected a path error on the
system bus (Runway).
FLT 5
n
04 SYS BD parity error
CPU n detected a data, address, or control
parity error on the system bus (Runway).
FLT 5
n
07 SYS BD Runway dir error
CPU n detected a directed error on the
system bus (Runway).
FLT 5
n
08 SYS BD Runway broad err
CPU n detected a broadcast error on the
system bus (Runway).
FLT 5
n
0A SYS BD illegal response
CPU n received data that did not match
any outstanding data request.
FLT 5
n
0B SYS BD bus timeout
CPU n timed out before receiving
requested data. The responder is logged in
the system responder address.
FLT 5
n
0C SYS BD CPU sync failure
CPU n’s synchronizer detected a rule
violation on the system bus (Runway).
INI 7000 DIMM start DIMM scan
Start looking for installed DIMMs.
INI 7002 SYS BD init mem tables
Initialize memory data structures.
FLT 7004 SYS BD mem plt upd fail
Error updating memory platform data.
FLT 7005 DIMM insufficient mem
Insufficient memory detected to continue.
TST 7010 DIMM check DIMM order
Start memory DIMM order check.
WRN 7011 DIMM skip DIMM ord ck
Bypass memory DIMM order check.
FLT 7012 DIMM DIMM order error
Memory DIMMs are not in the proper
order.
FLT 7013 DIMM DIMM order error
Memory DIMMs are not in the proper
order. As a result, the system cannot
access one or more DIMMs and has
deallocated all inaccessible DIMMs.
TST 7016 DIMM DIMM pair check
Start memory DIMM pair check (DIMMs
in a pair (e.g. 0a/0b) must match in
J7000).
WRN 7017 DIMM skip mem pair ck
Bypass memory DIMM set check.
FLT 701F DIMM no memory found
Memory scan couldn’t find any DIMMs.
Table 3-2. Chassis Codes for the B2000 Workstation
Ostat Code FRU Message
Description