Programming instructions

110 Chapter 4

Field Replaceable Units

FRU Removal and Replacement

I/O Cards

This section explains how to remove and replace (or install) I/O cards in the B2000

workstation.

The B2000 workstation’s system board has four Peripheral Connect Interface (PCI) slots

for option I/O cards. Slots 1 and 2 are full-size (PCI-2X) slots. Slots 3 and 4 are half-size

(PCI-1X) slots.

NOTE

The optional graphics cards supported by the B2000 workstation are designed

to be electrically compatible with the PCI slots. See Table 1-1 in Chapter 1 for

the optional graphics cards supported in the B2000 workstation.

Figure 4-34 provides a brief description of slot capabilities.

Figure 4-34. PCI Card Slot Numbering and Capabilities

The information described in Figure 4-34 is also provided on the B2000 system label on the

chassis floor inside the workstation. See Figure 4-35 for the location of the system label.

Figure 4-35. B2000 System Label

64-bits, 5V, 33MHz

32-bits, 5V, 33MHz

Slot 1

Slot 2

Slot 4

Slot 3

B2000 System Label

Front of the

Workstation