Specifications

84 Chapter4

Changing Your Workstation’s Hardware Conﬁguration

I/O Cards

1. Power off the workstation, and unplug the workstation’s power cord

from the electrical outlet. Note that when you press the workstation’s

power switch, the workstation automatically performs a shutdown

-q.

2. Open the side panel of the workstation as explained in the section

“Opening the Left Side Panel” in this chapter.

3. Pull evenly in the direction of the arrow on both PULL tabs of the I/O

card retainer to remove it. See Figure 4-7.

Figure 4-7 Removing the I/O Card Retainer

4. Locate the I/O card you want to remove and using a T-15 Torx driver

remove the I/O card’s bulkhead screw as shown in Figure 4-8.

I/O Card Retainer

I/O Card

Air Divider