Specifications

Chapter 4 83

Changing Your Workstation’s Hardware Conﬁguration

I/O Cards

Figure 4-5 B2000 System Label

Note that the four I/O slots as seen from the back of the workstation are

labeled from top to bottom starting with one. See Figure 4-6.

Figure 4-6 I/O Slot Numbering

Removing I/O Cards

You will need a T-15 Torx driver or ﬂathead screwdriver to remove the

I/O slot bulkhead screws.

Here are the steps required for remove an I/O card from the workstation.

I/O Slot 1

I/O Slot 4