Specifications

82 Chapter4
Changing Your Workstation’s Hardware Configuration
I/O Cards
Figure 4-4 Location of B2000 System Label
CAUTION If you are installing an additional graphics card, you must insert the fx
card in Slot 1 for optimal performance.
After you connect the monitor to the additional graphics card, you will
need to change the graphics path for that monitor. To do this read the
section “Displaying and Setting the Monitor Type” in the chapter “The
Boot Console Interface.”
The label on the chassis floor of your workstation contains important
information for I/O configuration. See Figure 4-5.
B2000 System Label