Specifications

Chapter 4 79

Changing Your Workstation’s Hardware Conﬁguration

Left Side Panel

4. Grasp the back edge of the left side panel and rotate it outward

approximately 30 degrees to the workstation. Next, pull the panel

toward you as shown in Figure 4-2. This releases the panel’s top and

bottom left side hook hinges from their hinge slots. See Figure 4-2.

Figure 4-2 Opening the Left Side Panel

NOTE The EMI gasket, as shown in Figure 4-2, must not be removed from the

side panel.

Left Side Panel

EMI Gasket

Hinge Hook

Hinge Slot

T-15 Torx

Thumbscrew