Specifications

Chapter 4 135
Changing Your Workstation’s Hardware Configuration
Memory Cards
NOTE When installing memory, you need to orient the notches on the bottom
edge of the DIMM card so that they are aligned with the keys on the
DIMM connector. See Figure 4-49. The keyed DIMM connectors prevent
you from installing the DIMM cards backwards.
For referencing the DIMM loading sequence see the label on the
chassis floor. See Figure 4-48.
Figure 4-48 B2000 System Label
Front of the
B2000
workstation
Memory Loading Sequence on
B2000 System Label