Specifications

Chapter 4 113

Changing Your Workstation’s Hardware Conﬁguration

Removable Media Devices

5. Place the ﬂoppy disk blank in the ﬂoppy disk bracket and insert the

four ﬂoppy disk mounting screws (T-15 Torx/slotted screws) into the

bracket and tighten. See Figure 4-33.

Figure 4-33 Installing the Floppy Disk Blank and Bracket

6. Slide the ﬂoppy disk blank and its bracket into the workstation

chassis as shown in Figure 4-33.

Floppy Disk

Bracket

Floppy Disk

Mounting

Screws

Floppy Disk Blank

Bracket Screw

(quantity 4)